Hebei DENENG Trade Co., Ltd

Hydraulic Motor Spool Valve Motor Characteristic features: BM1 Series Motor is a small volume, spool valve, economical type of moto. Characteristic features: design of spool and gear set, which provide small volume, high power and low weight. Credible design for shaft seal, which can bear high pressure and be used in parallel or in series. Special distribution flow system can meet the requirement of low noise. Direction of shaft rotation and speed can be controlled easily and smoothly. Best combination of efficiency and economy in medium load applications. Main Specification: Displacement(ml/r) 50 63 80 100 125 160 200 250 315 400 Flow(LPM) Cont. 38 45 58 58 58 58 58 58 58 58 Int. 45 53 69 69 69 69 69 69 69 69 Speed(RPM) Cont. 698 663 685 560 456 356 285 236 179 145 Int. 858 775 820 671 548 426 341 282 210 173 Pressure(MPa) Cont. 12.5 12.5 12.5 12.5 12.5 12.5 11 10 9 9 Int. 14 14 14 14 14 12.5 12.5 12.5 12.5 11 Torque(N*m) Cont. 74 87 124 155 194 227 282 302 365 456 Int. 86 98 141 176 221 260 318 383 406 521 Note:  1. Intermittent means the entrance of maximum pressure; continuous working pressure means the differential pressure; 2. Motor should not work under the highest pressure and the maximum speed. 3. The running time should not exceed 10% under intermittent working conditions 4. The Maximum working temperature is 80℃ 5. The maximum allowable back pressure is 10Mpa, but the recommended back pressure should not exceed 5MP, a leaking pipes is needed when exceeding. 6. One hour running time under 40% of maximum working pressure is recommended before full capacity working. 7. Recommending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO 18/13.